The Berridge L-Panel is a versatile and maintenance free panel for use on soffit, ceilings or fascia.  The prefinished panels can be used over open framing or solid sheathing.  The smooth, stucco embossed and vented options allow this panel to be used throughout a project for many different applications.

24 and 22 Gauge Steel
0.032 Aluminum

Uses:  Soffit, Ceiling, Fascia, Screen Wall
Coverage:  11 5/8″
Finishes:  Smooth, optional stucco emboss
Fasteners:  Concealed
Applications:  Vertical over open framing or solid sheathing
Pattern:  Optional vee-grooves and venting

ASTM Tests
     •   ASTM E-1592 wind resistance tested

Miami-Dade approved

Texas Department of Insurance listed

Unless otherwise noted, all testing is for steel only
*  Approved for steel and aluminum


  • Panel is available from the factory in continuous lengths to a maximum of 40′
  • May be site-formed using the Berridge FP-16 Roll Former
  • Vented option provides 5.19 square inches of Net Free
    Vent Area (NFVA) per linear foot of panel.  (BMC does
    not recommend vented products in applications subject to
    aggressive atmospheres, marine environments or high
    humidity due to the corrosive nature of these environments
    on raw edges of steel.)